Carbon JL/JT Rubicon Front D44 32 Spline One Piece Conversion Kit
The Front Dana 44 Axle Conversion Base Kit is a tremendous upgrade to convert your factory CAD housing into a one piece axle design, providing increased strength and durability for your Rubicon JL Wrangler.
Features Include:- For Rubicon JL Wrangler Dana 44 Front Axles
- Made of 4340 High Strength Chromoly
- Comes With Both Driver and Passenger Axles
- Spicer U-Joint Fully Assembled with Standard Clips
- Bolt In Application, No Modifications Required
- Uses Large 5-7166X Series Spicer U-Joint
- Dual Heat Treat Designed for Strength & Durability
- Block Off Plate Included
- Over 50% Stronger than Stock
The axles are designed with large 5-7166X Series Spicer U-Joints. The Spicer U-Joints are engineered with a solid cold-formed body while the bearing cups are heat treated for strength. The u-joint is precision ground and case hardened for durability and the multi-lip seal keeps the grease in and contaminants out. The Spicer U-Joints come fully assembled with standard clips and are ready to install.
The axles include both the passenger and driver side axle shafts and come with a block off plate. The block off plate replaces the vacuum-actuated fork housing allowing you to convert your center axle disconnect (CAD) housing into a one piece axle design.
Note: Removal of the FAD system may cause driveshaft vibrations. Will require a programmer (Tazer mini) to remove dash light warning.
[click for less...]
THE TECH
Carbon JL Rubicon Front D44 32 Spline One Piece Conversion Kit
The Front Dana 44 axle kit is for Rubicon JL Wranglers and JT Gladiator Rubicon models; this converts your CAD housing to a One Piece solution. The Axle are made of 4340 chromoly steel and is dual heat treated for unprecedented strength and durability making the Carbon Off-road Axles over 50% stronger than stock!
5-7166X Series Spicer U-Joints
The axles are designed with large 5-7166X Series Spicer U-Joints. The Spicer U-Joints are engineered with a solid cold-formed body while the bearing cups are heat treated for strength. The u-joint is precision ground and case hardened for durability and the multi-lip seal keeps the grease in and contaminants out. The Spicer U-Joints come fully assembled with standard clips and are ready to install.
CAD Housing Block Off Plate
The axles include both the passenger and driver side axle shafts and come with a block off plate. The block off plate replaces the vacuum-actuated fork housing allowing you to convert your center axle disconnect (CAD) housing into a one piece axle design and is laser etched with the Carbon Offroad Logo.
TECHNICAL SPECIFICATIONS
| Items | Details |
|---|---|
| Compatibility | 2018 + JL Wrangler and JT Gladiator(Rubicon) |
| Axle | 4140 Chromoly Steel |
IMPORTANT NOTES
Requirements: Removal of the FAD system may cause driveshaft vibrations. Will require a programmer (Tazer mini) to remove dash light warning.